PARAMOUNT BED PY-700 Series, Instruction Manual

Page: 9 / 14

8
N
o
te
!
N
o
te
!
ASSEMBLY PROCEDURE
WARNING
•
Be careful when handling parts for assembling the trolley. There is a risk of
injury due to falling parts or getting parts of the body caught in the parts.
•
After assembly, be sure to check that there is no rattling and that all
screws are properly tightened. There is a risk of injury due to falling over,
or the trolley could be damaged or deformed.
▪
Assembling the Trolley
When assembling the trolley, place a cardboard box or similar protective material on a level
floor.
Do not use cap bolts other than those included with the product.
Cardboard box
Supportive bar
Refer to the figure on the left to place the
supportive bar with the bolt attachment hole
upward.
Bolt attachment hole
Upper tray
(with safety label)
Notched part of attachment bracket
Attachment
bracket hole
Bolt attachment
hole
Protrusion of supportive bar
As shown in the figure, hook the notched part of the
attachment bracket of the upper tray (with safety
label) to the protrusion of the supportive bar and
align the position of the attachment bracket holes of
the upper tray against the bolt attachment holes,
then use the cap bolts to fix temporarily in place. (2
locations)
Attach the upper tray (with safety
label) in such a way that it comes to
the top (the grip side) of the
supportive bar.
In the same way as , use the cap bolts to fix the
bottom tray temporarily. (2 locations)
Bottom tray
Place the other supportive bar on the upper and
bottom trays with the bolt attachment holes
downward and in the same way as , hook the
protrusion of the supportive bar to the notched part
of the attachment bracket of the upper and bottom
trays, then align the position of the attachment
bracket holes of the upper and bottom trays
against the bolt attachment holes and use the cap
bolts to fix temporarily in place. (4 locations)