28
Making the settings again
z
z
All settings can be returned to the default state by simultaneously pressing any two operation buttons at
the front of the handheld controller and the Set button at the back (see p. 25) for three seconds or more.
z
z
The default state (nothing has been selected) of the handheld controller is as described below:
• Handheld controller operation selection: All operations are enabled
• Speed: Normal
• Operation sound: ON
Note
!
z
z
Settings are not canceled even after a power failure or if the power plug or handheld
controller plug is unplugged.
Storing the handheld controller
CAUTION
z
z
Do not hold the belt for storing the handheld controller to operate the
armrest. The belt for storing the handheld controller may get damaged.
z
z
Do not hang objects other than the handheld controller on the belt
for storing the handheld controller. The belt for storing the handheld
controller may get damaged.
z
z
The belts for storing the handheld controller are
located on the left and right sides of the recliner.
Use the belt on the side that is most convenient.
z
z
A clip holds the handheld controller cable
in place in the belt for storing the handheld
controller.
Belt for storing the handheld controller
Armrest
Handheld Controller
Clip