www.parametric.ch/product/tcr
Electrical Installation
TCR devices can be powered by a 5-14V DC power supply or a battery (not included).
•
Carfully check polarization
•
Gently press terminals and
push in wire.
•
Wires should be 22
– 18
AWG (0.2
– 0.75mm
2
).
•
Guide the cable through
the cable gland.
•
Before closing the casing,
make sure that the two
components are aligned
as depicted.
•
The cable gland is pointing
downwards and should be
fastened to ensure water
protection.
