6.3
Power Supply Connector
The device is designed to be supplied by a +48VDC power supply, but can operate in the range +48-
57VDC. Power is supplied via a 6-pin terminal block connector with the following pinout
Note: All Power Supplies should provide over-current and short-circuit protection, and should have
a capacity rating to meet the required output current for the device plus any PoE powered device
requirements
6.4
PoE Compatibility
Model No
IEEE 802.3af
IEEE 802.3at
IEEE 802.3bt
PDT-NSU-0008-MP-I
●
●
The PoE output for this model is compatible with PoE and PoE+ Standards, as can be seen in the
table above.
6.5
PoE Power Budget
The PoE Power Budget for this unit is 240W and it is advised to connect PWR 1 and PWR 2 to
separate supplies if power supply redundancy is required
Pin
Group
Input
1
PWR 1
GND
2
+48-57VDC
3
N/A
NC
4
NC
5
PWR 2
GND
6
+48-57VDC
