9. Bolt the Aluminum Channel to the front support of the Gimbal using a Machine Screw
and Locknut. You may need need to use a drill to enlarge the mounting hole on the
Gimbal.
10. Screw the Aluminum Channel to the back support of the Gimbal. Since it is extremely
difficult to access the other side of the hole, we won’t use a nut here, but rather just
thread into the plastic of the Gimbal mount, so don’t drill out or enlarge the hole! Tighten
the machine screw until the resistance suddenly increases (don't over tighten!).
Copyright © Parallax Inc.
Add a Gimbal Mount to Your ELEV-8 V2
07/30/2018 Page 5 of 8
