© Parallax, Inc. 2004 - Crawler Kit for Boe-Bot Robot Manual
5
Step #7 Installing the Rubber Feet
Item Qty Description
(D) (6) Rubber
Feet
Use
Fig #15
as a guide to install the rubber feet.
Be careful not to bend the legs. Slide the rubber feet (D)
onto each Leg as shown in
Fig #16
. Double check your
work then proceed to
Step #8
.
Fig #15
Fig #16
Step #8 Preparing your Boe-Bot
Item Qty Description
(1)
Your Boe-Bot
Use
Fig #17
as a guide. To complete the Crawler Kit upgrade, some
simple changes must be made to your Boe-Bot. First, remove the
wheels and ball caster. Then, remove your Board of Education
®
project platform to prevent the chance of damaging it during the
installation, and save the screws for the final step. Next compare your
servo installation to
Fig #17
. If your servos are installed inside the
Boe-Bot chassis, they must be removed and reinstalled as shown.
Make sure the servo head is toward the middle of the chassis then
proceed to
Step #9
Fig #17
D
D
D
D
D
D