15
PARALINX TRITON
TROUBLESHOOTING
4
5
6
Abnormal Color/Tint on Video Signal
- Unplug the HDMI cables on the transmitter & receiver and plug them back in again.
- Power cycle the transmitter and receiver
- Try different HDMI cables
Digital Noise on the Image
- Make sure the transmitter and receiver are within range (maximum 450 ft/140m).
- Bring them closer together to see if the problem persists
- If there are several walls or obstacles in between the transmitter and receiver, try to
remove them or raise the units to send the signal over them
Video Signal is Fine but There is No Audio
- Make sure the video source is not muted
- Make sure the volume on your monitor is turned up
- Check to make sure your monitor supports the audio format sent by the video
source.
- Change audio format if necessary. If audio format has been changed, power cycle
both transmitter and receiver
- Try different HDMI cables on your receiver and transmitter in case it is a problem
with the cable(s)
- If the Microphone icon is displayed on the transmitter LCD, make sure an audio
signal is being sent through the 3.5mm audio input on the transmitter
- If the Microphone icon is NOT displayed on the transmitter LCD, make sure an audio
signal is being sent through the HDMI cable
TROUBLE-
SHOOTING
FOR ADDITIONAL INFORMATION AND
SUPPORT VISIT OUR KNOWLEDGE BASE AT:
WWW.PARALINX.NET/SUPPORT
IMPORTANT NOTE:
For best results, when using
multiple systems in close
quarters, select channel with
at least a one-number gap.
For instance: Camera A on
channel 1 and Camera B on
channel 3
.