TO UNLOCK/UNFOLD RECEIVER BED
To unlock the receiver, disengage the four latches located in the centre of the
1.
receiver bed.
Fold the ends of the receiver bed over.
2.
Remove the support arm detent pins.
3.
Insert the support arms at each end in the support arm housings.
4.
Re-insert the support arm detent pins fully.
5.
At the end of the receiver bed, pull out the spring pin and rotate 90 (this will lock
6.
the pin in an out position).
Rotate the gate up and release the spring pin by rotating 90 .
7.
Ensure the spring pin is fully engaged and the gate is firm before transporting.
8.
Reverse process to fold away.
9.
<PARA >NOTE: Ensure all detent pins and spring pins are fully engaged before
transportation.
Latch
Support Arm
Gate
Support Arm Housing
Support Arm Detent Pin
Spring Pin
