
4.
PROGRAM
Display shows TIME header.
5.
NEXT,+,-
Use these keys to set time, date and daylight savings time information.
6.
PROGRAM
Press PROGRAM key to step through headers until ASTR (astro
header) is reached.
7.
NEXT
Sunrise time is displayed with hours flashing.
8.
+/-
Set to today’s sunrise hour.
9.
NEXT
Sunrise minutes are flashing.
10.
+/-
Set to today’s sunrise minutes.
11.
NEXT
Sunset time is displayed with hours flashing.
12.
+/-
Set to today’s sunset hour.
13.
NEXT
Sunset minutes are flashing.
14.
+/-
Set to today’s sunset minutes.
15.
NEXT
LATT N-10o is displayed (latitude 10o north).
16.
+/-
Roll to the desired latitude.
17.
NEXT
Displays CHAN 1 NO.
18.
+
Change NO to YES to assign astro to channel 1.
19.
PROGRAM
Press PROGRAM key to step through headers until EVNT (event
header) is reached.
20.
NEXT
First event is shown with event # flashing.
21.
NEXT
Event type is flashing.
22.
+
Select ON event type.
23.
NEXT
Hours are flashing.
24.
+
Roll hours to 4 AM.
25.
NEXT
Minutes are flashing. 00 is desired value.
26.
NEXT
SUN is flashing. NO is displayed.
27.
+
Change NO to YES to assign this ON event to Sunday.
28.
NEXT,+
Assign this ON event to MON - SAT.
29.
NEXT,+,-
Second event is shown with event # flashing. Program this second
event as an OFF at 11:00 PM for SUN - SAT.
30.
RUN
Programming is complete. The control will perform a status update
before going into the RUN mode.
Example No. 3
Operation of Enabler Input
16
Summary of Contents for EL78
Page 9: ...U S LATITUDE CHART 9 World Latitude Chart ...
Page 26: ...26 NOTES ...
Page 27: ...27 NOTES ...