Installing the Outdoor Remote Sensor:
Note:
You will need an electric drill for this step.
•
Find an appropriate place for the outdoor remote sensor.
Note:
Make sure you install the outdoor remote sensor within a radius of 60 meters from the
weather station. If there is an obstacle between the outdoor remote sensor and the weather
station, shorten the distance between the sensor and the weather station according to the
actual location to prevent the wireless signal from penetrating the obstacle and affecting the
quality of the data transmission.
•
For wall mounting:
Hang the outdoor remote sensor with the mount on one screw.
Reception of the Radio signal:
•
The clock automatically starts the
DCF
signal search after 7 minutes of any restart or
changing of new fresh batteries. The radio mast icon starts to flash.
•
At 1:00 /2:00 / 3:00 am, the clock automatically carries out the synchronization procedure
with the
DCF
signal to correct any deviations to the exact time. If this synchronization
attempt is unsuccessful (the radio mast icon disappears from the display), the system will
automatically attempt another synchronization at the next full one hour. This procedure is
repeated automatically up to total 5 times.
•
To start manual
DCF
signal reception, press the “ ” button once. If no signals received
within 7 minutes, then the
DCF
signal search stops (the radio mast icon disappears) and
start again at the next full one hour.
•
During RC reception
，
to stop searching radio signal,
press the “ ” button once.
F.Y.I.:
•
A flashing radio mast icon indicates that the
DCF
signal reception has started
•
A continuously displayed radio mast icon indicates that the
DCF
signal was received
successfully
•
The symbol "DST" indicating the time of receipt for daylight saving time.
•
We recommend a minimum distance of 2.5 meters to all sources of interference, such as
televisions or computer monitors
•
Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In
such extreme circumstances, place the system close to the window.
•
During the
DCF
radio receive mode, only the
“
” button function, other button
operation have no function,
If you want to carry out other functions of operation, please
press “ ” button to exit the
DCF
radio receive mode.
