background image

PARAGON PRO MANUFACTURING SOLUTIONS INC

LIMITED WARRANTY

TELPRO INC products manufactured by PARAGON PRO MANUFACTURING SOLUTIONS INC are warranted to be 

free from defects in material and workmanship under normal use for one year from date of purchase.

If a TELPRO INC product is proven to be defective in material or workmanship within the covered time frame 

from the date of purchase, return the defective part to PARAGON PRO MANUFACTURING SOLUTIONS INC and 

we will either repair or replace the part at our option. We will neither assume nor authorize any other person 

to assume for us any other liability.

Written notice including commercial invoice detailing the nature of the defect, date of purchase, and the 

company from which you purchased your unit must be received and acknowledged by PARAGON PRO MANU-

FACTURING SOLUTIONS INC before any units may be returned. Shipping costs shall be the responsibility of the 

product purchaser.

This warranty shall not apply to any equipment that has been repaired or altered outside of the factory in any 

way so as in our judgment to a˜ ect its stability or reliability nor which has been subjected to abuse, misuse, or 

negligence.

PARAGON PRO MANUFACTURING SOLUTIONS INC reserves the right to make changes or improvements in 

design without incurring obligation to install the same on previous units.

PARAGON PRO MANUFACTURING SOLUTIONS INC shall not be liable for loss, damage, or expense directly or 

indirectly from use of its products, their transportation, their repair, or from any other cause. Acceptance of 

the manufacturer’s product constitutes agreement to the terms of this warranty and further that the manufac-

turer shall have no liability for any special or consequential damages.

This Warranty is in lieu of all warranties express or implied.

Fill in the following information, attach a copy of your sales receipt or invoice and ÿle in a safe place.

Date of purchase: __________/__________/___________

Name& model# _______________________________________________________________________

Serial #: __________________________________________

NOTE: The following components of the PANELLIFT® Model 439 Drywall Lift are warranted to be free from 

defects in material and workmanship under normal use for three years from date of purchase.

Part# 
52-03

52-05

52-07

52-09

52-10

Description

       #35 chain assembly 

       #50 chain assembly 

       #Outer planet set w/ bronze 

52-11

52-11

52-15

#40 chain assembly

1 1/4” #50 roller assembly 

Drive assembly

Clutch assembly w/sprocket

52-16

       #

1/2” x 2 1/4” 

Shoulder bolt w/ fastners

 

       #40 Winch drive chain

WARR

A

NTY

Summary of Contents for PANELIFT 439





















Reviews: