4
December
2004
MIM4-A2-GZ40-00
3. Slide the MIM-4000F firmly into place. Do not use excessive force.
4. Secure the MIM-4000F by tightening the fastening screws on the MIM
faceplate with a flat-blade screwdriver.
Installing and Cabling SFP Transceivers
The following SFP transceivers are available for installation in the MIM-4000F:
SFP-MMF – Gbe SFP Multimode Fiber Optic Transceiver, Short Reach
SFP-SMF10 – Gbe SFP Single Mode Fiber Optic Transceiver, 10Km Reach
SFP-SMF40 – Gbe SFP Single Mode Fiber Optic Transceiver, 40Km Reach
SFP-SMF80 – Gbe SFP Single Mode Fiber Optic Transceiver, 80Km Reach
To install SFP transceivers in the MIM-4000F:
Procedure
1. Insert an SFP transceiver into an SFP socket on the MIM-4000F.
2. Insert the LC connector of your fiber optic cable into the SFP transceiver.
3. Observing the minimum bend radius for your cable, fasten it in such a way that
it will not be kinked or snagged in the course of other cabling. If you do not
know the specifications for your cable, maintain a radius of at least ten times
the cable diameter.
4. Repeat for all the sockets you intend to use.
Managing the MIM-4000F
The configuration and monitoring of the integrated switch on the MIM-4000F is
performed through the management screens of the BSX8000 that hosts this
module.
04-17600
1
4
L
A
D
L
A
D
L
A
D
L
A
D
MIM-4000F
