Paradyne Hotwire ATM Line Cards 8335, User Manual

Page: 39 / 132

3. Configuration
8335-A2-GB20-70 February 2003
3-17
For . . . Enter . . .
Latency The data stream path for the port (Default = Interleaved):
Fast – The data stream uses the fast path between the
line card and the endpoint.
Interleaved – The data stream uses the interleaved path
between the line card and the endpoint.
Behavior The training behavior (Default = Adaptive):
Adaptive – The line card will train up to the highest
operational rate less than or equal to the rates set in the
Downstream Maximum Speed and Upstream Maximum
Speed fields.
Fixed – The line card will train only at the rates set in the
Downstream Speed and Upstream Speed fields.
Downstream Speed The downstream DSL line rate (in 32 kbps increments) the
card trains to if Behavior is set to Fixed:
DMT and ANSI: 32–8000 kbps (Default = 8000 kbps).
G.lite: 64–3008 kbps (Default = 1536 kbps).
Upstream Speed The upstream DSL line rate (in 32 kbps increments) the
card trains to if Behavior is set to Fixed:
DMT and ANSI: 32–832 kbps (Default = 832 kbps).
G.lite: 32–512 kbps (Default = 64 kbps).
Maximum
Downstream Speed The maximum downstream DSL line rate (in 32 kbps
increments) the card can train to if Behavior is set to
Adaptive:
DMT and ANSI: 32–8000 kbps (Default = 8000 kbps).
G.lite: 64–3008 kbps (Default = 3008 kbps).
Minimum Downstream
Speed The minimum downstream DSL line rate (in 32 kbps
increments) the card can train to if Behavior is set to
Adaptive:
DMT and ANSI: 32–8000 kbps (Default = 32 kbps).
G.lite: 64–3008 kbps (Default = 64 kbps).
Maximum Upstream
Speed The maximum upstream DSL line rate (in 32 kbps
increments) the card can train to if Behavior is set to
Adaptive:
DMT and ANSI: 32–832 kbps (Default = 832 kbps). G.lite:
64–512 kbps (Default = 512 kbps).
Minimum Upstream
Speed The minimum upstream DSL line rate (in 32 kbps
increments) the card can train to if Behavior is set to
Adaptive:
DMT and ANSI: 32–832 kbps (Default = 32 kbps).
G.lite: 32–512 kbps (Default = 64 kbps).
Target Margin The noise margin relative to a Bit Error Ratio of 10
-7
required for a successful activation of the port :
0–31 dB in 1 dB increments (Default = 4 dB).