9
8776-A2-GZ40-40
February 2001
Configuration Edit/Display
The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded and allows groups of configuration options to be
displayed. To access the Configuration Edit/Display screen, follow this menu
selection sequence:
Main Menu
→
Configuration
→
Current Configuration
– or –
Main Menu
→
Configuration
→
Default Factory Configuration
Î
ÎÎ
main/config/edit
Hotwire
Slot: 4
Model: 8776
CONFIGURATION EDIT/DISPLAY
Network
G.703
Copy Ports
System Options
Management and Communication
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
MainMenu
Exit
Save
Select . . .
To Access the . . .
To Configure the . . .
Network
Network Interface Options, Table 1
DSL network interface
Ports 1–4.
G.703
G.703 Interface Options, Table 2
G.703 interface.
Copy Ports
Copy Ports Options, Table 3
DSL network and G.703
interface ports by copying
options from port to port.
System
Options
System Options, Table 4
General system options of
the unit.
Management
and
Communication
H
Telnet Session Options, Table 5
H
General SNMP Management
Options, Table 6
H
SNMP NMS Security Options,
Table 7
H
SNMP Traps Options, Table 8
Management support of the
unit through SNMP and
Telnet.
NOTE:
The SNMP NMS Security Options screen is not available in IP Conservative mode.
