background image

8373-A2-GZ40-20

June 2000

7

Warranty, Sales, Service, and Training Information

Contact your local sales representative, service representative, or distributor 
directly for any help needed. For additional information concerning warranty, sales, 
service, repair, installation, documentation, training, distributor locations, or 
Paradyne worldwide office locations, use one of the following methods:

„

Internet:

 

 Visit the Paradyne World Wide Web site at www.paradyne.com

(Be sure to register your warranty at www.paradyne.com/warranty.)

„

Telephone:

 

 Call our automated system to receive current information by fax 

or to speak with a company representative.

— Within the U.S.A., call 1-800-870-2221

— Outside the U.S.A., call 1-727-530-2340

Document Feedback

We welcome your comments and suggestions about this document. Please mail 
them to Technical Publications, Paradyne Corporation, 8545 126th Ave. N., Largo, 
FL 33773, or send e-mail to [email protected]. Include the number and 
title of this document in your correspondence. Please include your name and 
phone number if you are willing to provide additional clarification.

Trademarks

Hotwire is a registered trademark of Paradyne Corporation. MVL is a trademark of 
Paradyne Corporation. All other products and services mentioned herein are the 
trademarks, service marks, registered trademarks, or registered service marks of 
their respective owners.

Copyright © 2000 Paradyne Corporation. Printed in U.S.A.

Summary of Contents for Hotwire 8373








Reviews: