manualshive.com logo in svg

Paradyne Hotwire 7996, User Manual, Page: 14 / 46

Share
Download
Paradyne Hotwire 7996 User Manual Download Page 14

 

 

7996 SHDSL NTU User’s Guide 

4.2 Main 

Menu 

Press the 

Up 

and 

Down

 arrow keys to select fields, and press the 

Left

 and 

Right

 arrow keys to 

select the parameters of fields. Type <

Ctrl-X

 > to exit and <

Enter

 > for confirmation. 

The main menu includes the following fields: 

Select Device: Select the device to be configured. This field is only available in LT 
mode. 

 

 

 

 

 

 

 

 

 

 

 

Select NE Mode (LT/NT): Select NT or LT operation mode. The factory default is LT 
mode. 
Configuration: Configure system parameters. 
Current Alarm & Status: Show the status of current alarms. 
Performance Statistics: Show the statistics of performance monitoring. 
Threshold Setup: Set the thresholds for system performance monitoring. 
Alarm History: View and clear alarm records. 
Test & Loopback Status: Perform a loopback, BER and self-test 
Configuration Database Maintenance: Upload; download; save the configuration 
database; and set the configuration database to factory default. 
Reset & Software Download: Perform a system reset or software download 
Logout: Exit the system 

14                                                                                   September

 

2004                                                         7996-A2-GB21-00 

Summary of Contents for Hotwire 7996















































Reviews:

No comments