2
October
2002
7900-A2-GZ42-00
Procedure
To install the Model 7974 unit on a wall:
1. Identify the screws provided in the hardware kit. Two screws are required for
each bracket.
2. Using the template provided, mark the placement of the screw holes on the
wall (see
Model 7974 Standalone Termination Unit Hardware Template
on
page 3). The unit can be mounted either vertically or horizontally.
3. Use a screwdriver to install the screws into the wall. Do not install the screws
flush with the wall. Leave enough clearance to hang the unit housing from the
screws.
4. Hang the unit from the screws.
Wall
Fasteners
02-17342
