Configuration Defaults & Command Line Shortcuts
B-4
6371-A2-GB20-00
March 2000
Table B-2.
Command Line Input Shortcuts (2 of 2)
nat basic address <ip–addr>
nat basic delete <private–ip>
nat basic delete <lower–private–ip> <upper–private–ip>
nat basic enable
nat basic map <public–ip> <private–ip>
nat basic map <lower–public–ip> <lower–private–ip> <upper–private–ip>
nat disable
nat napt address <ip–addr>
nat napt delete {udp | tcp} <port>
nat napt enable
nat napt map {udp | tcp} <server–ip> <port>
nat purge
nat timeout <time>
password {admin | operator} <password>
ping <dest–ip> [mgt | –x <source_ip> ] [–l <bytes>] [–w <time>]
proxy arp {d0 | e0} {disable | enable}
restart
save
show alarms
show arp
show arp <ip–addr>
show arp timeout
show config
show console
show dhcp {relay | server}
show interface {d0 | e0}
show ip route
show ip route <ip–addr>
show log [<number of entries>]
show nat {basic | napt}
show statistics [d0 | e0 | ip]
show syslog
show system
syslog {disable | enable}
syslog ip <ip–addr>
syslog level {emer | err | norm | info | debug}
syslog port <port>
system identity <identity>
traceroute <dest–ip> [–x <src–ip>] [–l <bytes>] [–w <time>] [–h <hops>]
