7
5020-A2-GN10-60
April 2000
POTS Splitter Chassis Installation
The POTS splitter chassis, 8600 Series and 8800 Series DSLAMS, and 8820
GranDSLAM are shipped with mounting brackets that allow them to be mounted
in a 19
″
or 23
″
cabinet or rack.
99-15426a-03
ALARMS
Major Minor
Fan
B
A
POWER
A
B
ALARMS
Major Minor
Fan
B
A
POWER
A
B
Hotwire
88x0
DSLAM
Chassis
POTS
Splitter
6-Slot
Chassis
19" Cabinet
19" Rack
TM
TM
Planning the POTS Splitter Chassis Installation
To plan the bracket and chassis installation, determine:
Whether the DSLAM will be rack-mounted. If your Hotwire 8600 Series
DSLAM chassis is being placed on a tabletop, install the rubber feet as
shown on page 5. Discard the rubber feet for any rack-mounted chassis.
Width of the rack: 19
″
or 23
″
.
Chassis position in the rack: center-mounted or front-mounted.
Center-mounting is recommended for convenient access to cables.
Whether the rack has mounting rails with threaded or non-threaded screw
holes.
NOTE:
Install chassis in the rack from the bottom up to maintain stability.
