Paradyne FrameSaver SLV 9124, Technical Reference

Page: 232 / 346

Operation and Maintenance
10-20
9124-A2-GH30-00 June 1999 - Preliminary
Network LMI-Reported DLCIs Status
Network LMI-reported DLCI statuses are selected from the Status menu.
Main Menu
→
Status
→
LMI Reported DLCIs
The LMI Reported DLCIs screen displays the status and CIR (if supported by the
switch) for each DLCI, whether the DLCI is configured or not. An asterisk
identifies each DLCI contained in the device configuration. Data and LMI status
received on DLCIs that are not configured pass transparently through the unit
between the network interface and the first data port without monitoring of DLCI
traffic or demultiplexing/multiplexing management diagnostics or user data. Data
received on DLCIs that are not configured on other frame relay links is discarded.
Table 10-8. Network LMI-Reported DLCIs Status
Field Status What It Indicates
DLCI 16 through 1007 Identifies the Local Management
Interface-reported DLCI numbers
assigned to the selected interface – the
identifying number assigned to the path
between two frame relay FrameSaver
units’ ports.
DLCI statuses are listed in ascending
order ( i.e., lowest number first ).
Status Active
Inactive
Deleted
1
New
1
LMI-reported status of the DLCI:
H
Whether the DLCI is active (capable
of carrying data) in the frame relay
network,
H
Whether it is inactive,
H
Whether it has been deleted by the
frame relay network, or
H
Whether it has been created by the
frame relay network.
CIR (bps) 0 – 1536000 Displays the committed information rate
reported by the Stratacom switch. CIR
information only appears in this column
when LMI Protocol is set to Standard.
If blank, the switch does not support this
feature.
1
Appears for 10 seconds only, before the network changes Deleted to Inactive and
New to Active.