Paradyne FrameSaver SLV 9124, Technical Reference

Page: 177 / 346

Configuration
8-55
9124-A2-GH30-00 June 1999 - Preliminary
Table 8-11. Node IP Options (3 of 3)
TS Management Link Access Level
Available Settings: Level-1, Level-2, Level-3
Default Setting: Level-1
Specifies the highest access level allowed when accessing the unit via a Telnet or FTP
session when the service provider is using the TS Management Link.
Display Conditions – This option does not appear when TS Management Link is set
to None.
NOTES: Telnet and FTP sessions on this link are not affected by the access level
set by the Session Access Level, Login Required, or FTP Login Required
option settings (see Table 8-14,
Telnet and FTP Sessions , on page 8-61).
Telnet and FTP sessions on this link are affected by the Telnet Session,
Inactivity Timeout, Disconnect Time and FTP Session option settings.
Level-1 – Allows Telnet or FTP access by network service providers with the capability
to view unit information, change configuration options, and run tests. This is the highest
access level allowed. Use this setting when downloading files.
Level-2 – Allows Telnet or FTP access by network service providers with the capability
to view unit information and run tests only; they cannot change configuration options.
Level-3 – Allows Telnet access by network service providers with the capability to view
unit information only; they cannot change configuration options or run tests.