background image

 1

FrameSaver

 DSL 9783 

Installation Instructions

Document Number 9783-A2-GN10-10

September 2000

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste
of surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com.
Select 

Library 

Technical Manuals 

FrameSaver Frame Relay Devices.

Select the following documents:

Document Number

Document Title

9000-A2-GB20

Configuring Frame Relay Service Over DSL

9783-A2-GB20

FrameSaver DSL 9783 User’s Guide

9783-A2-GL10

FrameSaver DSL 9783 Quick Reference

To order a paper copy of a Paradyne document:

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

Outside the U.S.A., call 1-727-530-8623

Upgrading a Basic Unit to SLV

Full SLV capability can be activated in basic FrameSaver

 DSL models at any time.

This is an optional feature that adds real-time and historical network performance
monitoring and SLA (Service Level Agreement) reporting capabilities to your
FrameSaver unit(s) and network. Simply order an Activation Certificate, providing the
model to be activated (9783), your OpenLane

 SLM system license key number, and

the number of FrameSaver units whose SLV capability is to be activated.

The OpenLane SLM system, Release 5.3 or later, is required to schedule the activation
of the SLV feature and to manage the number of activations remaining on the
certificate. OpenLane also provides a Certificate Summary Report to assist you in the
management of the certificate.

Summary of Contents for FrameSaver DSL 9783 CSU/DSU




















Reviews: