Paradyne DNE4500-P, Installation Instructions Manual

Page: 7 / 12

7
Power solid green Unit is operational If the Power LED is not
illuminated, it is likely that the
DNE4500 is not receiving
power and therefore none of
the LEDs will be illuminated.
Fast Ethernet
100 solid green Fast Ethernet
connection (100
Mbps) is
established If the Fast Ethernet 100 LED is
illuminated, the Fast Ethernet
Lnk LED will also be
illuminated.
Note: A solid green Fast
Ethernet 100 LED can also
signify a DS3 Alarm
if the Fast
Ethernet Act and Lnk LEDs
show solid illumination and the
DS3 Lnk LED remains unlit.
no
illumination No Fast Ethernet
connection If the Fast Ethernet 100 LED
remains unlit but the Fast
Ethernet Lnk LED is illuminated
then a connection has been
established at 10 Mbps rather
than 100 Mbps.
Fast Ethernet
Act pulsing
amber Typical Ethernet
activity Traffic is flowing without any
problems.
solid amber Heavy traffic Note: A solid amber Fast
Ethernet Act LED can also
signify a DS3 Alarm
if the Fast
Ethernet 100 and Lnk LEDs
show solid illumination and the
DS3 Lnk LED remains unlit.
no
illumination No Ethernet activity Either there is no Ethernet link
or a link exists but there is no
activity.
Table 1. LED States (2 of 3)
LED State Indication Additional Information