Paradyne COMSPHERE DualFlow 3616, User Manual

Page: 22 / 139

COMSPHERE DualFlow Data Service Units
1-8 July 1999 3615-A2-GB20-40
Table 1-5
2-Wire Switched 56 DBM Technical Specifications
Specifications Criteria
APPLICATION Full- or half-duplex data transmission via 56 kbps switched services
compatible with AT&T, US SPRINT
r
, and MCI
r
using DataPath
t
2-wire
switched access to a local exchange carrier (LEC) or an interexchange
carrier (IEC)
COMMUNICATION LINE A dedicated 2-wire access or a local exchange carrier 2-wire switched
access
PORT RATES Async or Sync rates: 56, 48, 38.4, 32, 28.8, 19.2, 18.8, 18.0, 16.8, 14.4,
12.0, 9.6, 9.2, 8.4, 7.2, 4.8, 4.4, 4.0, 2.4, 2.0, and 1.2 kbps
Other asynchronous rates (e.g., 150, 300, 600, and 1800 bps) can be
obtained through oversampling
Asynchronous rates support ITU-T V.14 extended rate range at
8 to 12 bits per character, including the
start and stop bit (+2.3, –2.5
percent overspeed/underspeed compensation at 10 bits per character)
DATA RATES 56 kbps (Note that the 2-wire Switched 56 DBM or 3600 Series DBM-D
uses proprietary rate adaption to support data rates of less than
56 kbps.)
DBM COMPATIBILITY If Call Setup is set for Callback or Password security, then the device is
compatible with a 3600 Series Switched 56 DBM only.
If Call Setup is set for Alarm or None, then any Switched 56 kbps
terminal interface unit (TIU) can be used.
SWITCHED 56 KBPS
NETWORK INTERFACE
3615 DualFlow DSU
3616 DualFlow DSU
6-pin modular jack, USOC SJA48
(One or two) 50-pin connector
APPROVALS
DOC
Certification Number
Load Number
230 5870 A
0
NETWORK COMPATIBILITY Northern Telecom NIS S204-2
e
1986
Equipment Warranty
and Support
If you experience trouble with this equipment, please
contact your sales or service representative (as
appropriate) for repair or warranty information. If the
product needs to be returned to the company service
center for repair, contact them directly for return
instructions using one of the following methods:
•
Via the Internet: Visit the Paradyne World Wide
Web site at http://www.paradyne.com
•
Via Telephone: Call our automated call system to
receive current information via fax or to speak with
a company representative.
— Within the U.S.A., call 1-800-870-2221
— Outside the U.S.A., call 1-727-530-2340