15
Configuration Options
Configuration options are accessed from the Configuration branch of the front panel
menu.
In the following tables, factory defaults are shown in boldface type.
Key to symbols:
D
Switched 56 DBM only
DD
2-wire Switched 56 DBM only
{
V.32 DBM only
{{
Only if Call Setup set to Pswrd
{{{
Only if Diag Type set to NonD
}
Only if Primary Core set to Yes
} }
Only at the Control
Hardware Straps
Value
DDD Interface
D
Permissive, Programmable
Frame Ground/Signal Ground
Connected, Disconnected
V.35 Test Mode Indication
Enabled, Disabled
EIA-232-D Test Mode Indication
Enabled, Disabled
–48 Vdc Alarm Monitoring
Enabled, Disabled
–48 Vdc Alarm Monitoring via NMS
Adapter Cable
Enabled, Disabled
DSU
Value
Rate(Kbps)
64CC, 64L, 56, 38.4, 19.2, 9.6, 4.8, 2.4
TxClkSource
Int, RXC, Ext, DDS
19.2 PowrLvl
+ 6, 0, –10
64KScramblng
On, Off
64KLatchLpbk
On, Off
V.54 Lpbk
Enab, Disab
