Paradyne BitStorm 6211 CPE User Manual Download Page 4

BitStorm 6211 Router User’s Guide 

4

 

FCC Declaration 

An FCC Declaration of Conformity may be downloaded from the Paradyne World Wide Web site at 
www.paradyne.com. Select Support -> Technical Manuals -> Declarations of Conformity. 

 

Notice to Users of the United States Telephone Network 

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the 
Administrative Council for Terminal Attachment (ACTA).  On the bottom side of this equipment is a label 
that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX.  If 
requested, this number must be provided to the Telephone Company. 

This equipment is intended to connect to the Public Switched Telephone Network through a Universal 
Service Order Code (USOC) type RJ11C jack.  A plug and jack used to connect this equipment to the 
premises wiring and telephone network must comply with the applicable FCC Part 68 rules and 
requirements adopted by the ACTA.  A compliant telephone cord and modular plug is provided with this 
product. It has been designed to be connected to a compatible modular jack that is also compliant. 

The Ringer Equivalence Number (or REN) is used to determine the number of devices that may be 
connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in 
response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To 
be certain of the number of devices that may be connected to a line, as determined by the total RENs, 
contact the local Telephone Company.  The REN for this product is part of the product identifier that has 
the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point. For 
example, 03 represents a REN of 0.3. 

If the ADSL modem causes harm to the telephone network, the Telephone Company will notify you in 
advance that temporary discontinuance of service may be required.  But if advance notice is not practical, 
the Telephone Company will notify the customer as soon as possible.  Also, you will be advised of your 
right to file a complaint with the FCC if you believe it is necessary. 

The Telephone Company may make changes in its facilities, equipment, operations or procedures that 
could affect the operation of the equipment. If this happens, the Telephone Company will provide advance 
notice in order for you to make necessary modifications to maintain uninterrupted service.  If trouble is 
experienced with the ADSL modem, refer to the repair and warranty information in this document. 

If the equipment is causing harm to the telephone network, the Telephone Company may request that you 
disconnect the equipment until the problem is resolved. 

The user may make no repairs to the equipment. 

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public 
service commission or corporation commission for information. 

If the site has specially wired alarm equipment connected to the telephone line, ensure the installation of 
the ADSL modem does not disable the alarm equipment. If you have questions about what will disable 
alarm equipment, consult your Telephone Company or a qualified installer. 

 

Summary of Contents for BitStorm 6211 CPE


















































Reviews: