Paradyne BitStorm 2461, Installation Manual

Page: 56 / 64

B. Connectors, Cables, and Pin Assignments
B-2
December 2002 2400-A2-GN20-20
Management Port Connector
The management port uses RJ45 jacks for a 10/100BaseT management interface
which uses auto-negotiation. With auto-negotiation, ports automatically negotiate
port speed and flow control to maximum performance and minimize packet loss.
CRAFT DCE Null Modem Adapter Port Connector
The RS-232 DB9 Null Modem Adapter is used for the CRAFT user interface.
GigE1/2 Connectors
The GigE1 and GigE2 copper connectors are 8-pin modular jacks for
10/100/1000BaseT.
Table B-2. Management Port Pinouts
Pin Signal
1 Transmitted Data +
2 Transmitted Data –
3 Received Data +
6 Received Data –
02-17350
MGMT
Table B-3. CRAFT Null Modem Adapter Pinouts
Pin Signal
3 Transmit
2 Receive
5 Ground
02-17351
CRAFT
Table B-4. GigE RJ45 Pinouts
Pin Pair Signal
1 white/green Transmit Data1 +
2 green/white Transmit Data1 –
3 white/orange Receive Data 2 +
4 blue/white Receive Data 3 +
5 white/blue Receive Data 3 –
6 orange/white Receive Data 2 –
7 white/brown Transmit Data 4 +
8 brown/white Transmit Data –
02-17353