Paradyne BitStorm 2400, User Manual, Page: 35 / 90

3. Using the Asynchronous Terminal Interface
2400-A2-GB20-10 December 2002
3-7
Configuration File Upload/Download Screen
The Configuration File Upload/Download screen is shown in Figure 3-5 . This
screen lets you conveniently upload or download configuration files for the switch.
It lets you share saved configurations across multiple switches. For example, if you
have a switch that contains a static route table with 100 entries and you want
another switch to have the same table of static routes, you can use this feature to
get the configuration information (which includes the static route table) from one
switch to the other. This keeps you from having to manually re-enter the 100 static
routes on the new switch.
Figure 3-5. Configuration File Upload/Download Screen
Use the Tab or arrow keys to move from one field to another. After you modify a
field, press Enter to validate it. If the information in the field is not valid, the
previous value will be displayed.
You can modify the following information:
After you modify the above information, use the Tab key to move to APPLY and
press Enter. This will begin the transfer.
The Load Status field will indicate what state the operation is in and the switch will
automatically reset when complete. Any errors will also be reported in the Load
Status field.
Field Description
Image Path Enter the relative path to the image (“persist” or “durable”) from the path
setup in TFTP, including the name of the image file.
TFTP Server
IP Address Enter the IP address of the host.
Direction <host-to-switch> indicates the configuration file will be transferred from
PC to switch, <switch-to-host> indicates from switch to PC.