2
Available Options
The following options can be ordered separately:
H
72-inch EIA standard cabinet, 19 inches wide
H
Redundant/replacement power supply
H
Power supply fan tray
H
Replacement fan tray for NAMs
H
Replacement baffle
H
FrameSaver SLV 9128 1-Slot Housing-to-Access Carrier Upgrade Instructions for
converting a 1-slot FrameSaver SLV 9128 for use in the access carrier
Contact your sales representative to order an option.
Before You Begin
Make sure you have:
-
A grounded SELV – 48 VDC source which has a disconnect device and
overcurrent protection
-
A clean, well-lit, and ventilated site that is free from environmental extremes
-
One-to-two feet of clearance for cable connections
-
Strain relief material for cable support
-
A large Phillips screwdriver to install the access carrier in a cabinet or rack
-
A small or medium Phillips screwdriver to install the I/O card filler panels and front
filler panels
-
A small, flat-blade screwdriver to install the I/O cards, cable connections, and
redundant power supply (if needed)
-
Contacted your network provider to coordinate installing the carrier and its
associated cards into the network
Safety Instructions
Refer to the
Important Safety Instructions beginning on page 13.
