3
7612-A2-GN10-20
December 1998
4. Insert the other end of the cable into the appropriate port of a
VT100-compatible terminal, PC, or modem.
The DSU has the factory-loaded set of VT100-compatible defaults for the
asynchronous terminal of 9.6 kbps, 8 bits per character, one stop bit, and no
parity.
5. Insert one unkeyed 8-pin connector on the Ethernet cable into the 10BaseT
port.
6. Insert the other end of the cable into the LAN interface.
7. Insert one end of the 34-pin V.35 cable into the DTE port.
8. Insert the other end of the V.35 cable into the DTE connector.
9. Insert the keyed 8-pin connector on the RJ48S network cable into the
NETWORK port.
10. Insert the other end of the cable into the RJ48S modular jack.
97-15310
RJ48S
Jack
NETWORK
TERMINAL
POWER
D
T
E
DTE
10BaseT
Connection
Terminal
Connection
Power
Connection
Network
Connection
DTE
Connection
10BaseT
LAN
CAUTION:
Use no power supply except the one provided with the DSU. Using the
wrong power supply can destroy the DSU.
