ALARM MEMORY DISPLAY
PANIC ALARMS
To send a silent or audible alarm to your
monitoring station, press and hold one of
the key combinations listed below for 3
seconds.
Panic Alarm Type Key Combination
Police
Press
[1]
and
[3]
Medical
Press
[4]
and
[6]
Fire
Press
[7]
and
[9]
To view the alarms that occurred during
the last armed period:
1. Press
[
MEM
]
.
2. 1689: The light(s) corresponding to the
breached zone(s) will illuminate.
1641BL: Use
[
S
]
and
[
T
]
to view the
breached zone(s).
3. Press
[
CLEAR
]
to exit.
TROUBLE DISPLAY
When a trouble condition occurs...
1689: the
TRBL
light flashes.
1641BL: the message “System Trouble
[
TRBL
] to view” appears on the
screen.
1. Press
[
TRBL
]
.
2. 1689: Numbers corresponding to
troubles will illuminate.
1641BL: Use
[
S
]
and
[
T
]
to view the
trouble(s).
Please consult the Trouble List in the
user manual or contact your installer
for repairs.
3. Press
[
CLEAR
]
to exit.
KEYPAD SETTINGS
(1641BL ONLY)
You can customize the keypad settings to
suit your needs.
1. Press and hold
[6]
for 3 seconds.
2. Choose one of the following. Press:
[1]
Backlight: keypad’s light (7 is
brightest).
[2]
Contrast: character intensity (7 is
lightest).
[3]
Scroll Speed: time between
messages (7 is slowest).
3. Press
[
S
]
and
[
T
]
to modify.
4. Press
[
ENTER
]
to save.
5. Return to step 2 or press
[
CLEAR
]
to
exit.
BYPASS PROGRAMMING
Bypassed zones are not armed when the
area is armed.
1. Press
[
BYP
]
and then enter your
[
ACCESS CODE
]
*.
(or press and hold
[
BYP
]
for 3
seconds)
**
.
2. Enter the zone number.
Or scroll the list and then press
[
BYP
]
when the desired zone appears on the
screen (1641BL only).
OR
Press
[
BYP
]
to activate Bypass Recall
(bypasses the zones that were
bypassed during the last armed
period).
3. Press
[
ENTER
]
to exit.
CHIME PROGRAMMING
The keypad beeps when a chime zone
opens.
1. Press and hold
[9]
for 3 seconds.
2. Enter the 2-digit zone number.
Or scroll the list and then press
[
FNC
1]
when the desired zone appears on the
screen (1641BL only).
3. Press
[
ENTER
]
(1689) /
[
CLEAR
]
(1641BL) to exit.
CLOCK PROGRAMMING
1689:
Set the system clock.
1. Press
[
ENTER
]
.
2. Enter the
[
SYSTEM MASTER CODE
]
.
3. Enter
[100]
.
4. Enter the time using the 24h clock (i.e.
6:15 p.m. = 18:15).
5. Press
[
CLEAR
]
to exit.
1641
BL
:
Set the system clock and day.
1. Press
[
ENTER
]
.
2. Enter the
[
SYSTEM MASTER CODE
]
.
3. Enter
[100]
.
4. Enter the time.
a.
If the keypad is set to follow the 24h
clock (i.e. 18:15), proceed
to step 6.
b.
If the keypad is set to follow the 12h
clock (i.e. 6:15 p.m.), proceed to step
5.
5. After entering the time, press
[1]
to set
the time in a.m. or
[2]
to set the time in
p.m..
6. Press
[
S
]
and
[
T
]
to select the day of
the week.
7. Press
[
ENTER
]
to exit.
* If needed, press the key(s) corresponding to the desired area(s). For two areas, press the other
key after the confirmation beep.
** The One-Touch Bypass Programming feature must be enabled by your installer.
1689_41-EQ01.qxd 1/31/2006 10:07 AM Page 2
