> Support IPC UPnP, 4PoE
ports
Initial Setup
Step 1: Initial Setup
• Locate the Alarm Panel (this will be located in a Cupboard or WIR).
• Open the panel and connect the battery, there will be a black and red lead loose, connect the black
cable to black terminal on battery and red cable to red terminal.
• Remove any booklets left in the panel and close door.
• Turn on the power point beside the alarm panel and proceed to the Keypad within your home.
• On the keypad the
[
TBL
]
button should now be illuminated RED.
Paradox Alarm K10V LED Keypad User Guide
1
Step 2: Setting the Date & Time
• Press the
[
TBL
]
button. (
[
TBL
]
will flash)
• Press the number
[
8
]
button. (
[
ARM
]
&
[
TBL
]
will flash in unison)
• Enter the time as HH:MM. (If HH is more than 13, skip next step)
• Press 1 for 24 hour clock. (
[
SLEEP
]
&
[
TBL
]
will flash in unison)
• Enter the year as YYYY. (
[
Stay
]
&
[
TBL
]
will flash in unison)
• Enter the month as MM. (
[
OFF
]
&
[
TBL
]
will flash in unison)
• Enter the day as DD. (
[
TBL
]
will flash)
• Press the
[
CLEAR
]
button to exit. (
[
TBL
]
will stop flashing)
Step 3: Changing the Master Pin Code
• Press the
[
PWR
]
then
1234.
(
[
PWR
]
&
[
1
]
will flash in unison)
• Press
01.
(
[
ARM
]
will flash)
• Enter your new 4 digit PIN. (
[
SLEEP
]
will flash)
• Re-Enter 4 digit PIN. (
[
STAY
]
will flash)
• Press the
[
ENTER
]
button. (
[
PWR
]
and
[
2
]
will flash in unison)
• Press the
[
CLEAR
]
button to exit.
Step 4: Arming & Disarming of your system
• Leaving home – Enter your 4 digit PIN Code to arm alarm.
• Returning home – Enter your 4 digit PIN code to disarm alarm.
Step 5: Adding additional users
• Press the
[
PWR
]
then your
MASTER CODE.
(
[
PWR
]
&
[
1
]
will flash in unison)
• Select a user by entering a 2-digit user number (02 to 32).(
[
ARM
]
will flash)
• Enter your new 4 digit PIN. (
[
SLEEP
]
will flash)
• Re-Enter 4 digit PIN. (
[
STAY
]
will flash)
• Press the
[
ENTER
]
button. (
[
PWR
]
and a number will flash in unison)
• Press the
[
CLEAR
]
button to exit.
