PCS250G-EI07 05/2018
SMS Messages for Backup
Module Supervision
List of SMS Commands
Technical Specifications
If you have any comments please write to us at Paradox.com/products/
feedback.
Command
Description
P[PASSWORD].SMS[GSM MODEM
TELEPHONE #].[IPRS-7 PASSWORD]
Used to program the receiver’s
SMS parameters
MG/SP EVO
MG/SP Details
EVO Details
[805]
[2950]
[5] Off + [6] Off
=
Module
supervision disabled
[5] Off + [6] On = Armed:
generates a trouble
(
default
)
[5] On + [6] Off = Armed:
generates an audible
alarm
[5] On + [6] On = Silent
alarm becomes an
audible alarm
[5] Off + [6] Off = Module
supervision disabled
[5] Off + [6] On =
Armed: generates an
audible alarm
[5] On + [6] Off =
Armed: generates a
trouble (
default
)
[5] On + [6] On =
Silent alarm becomes
an audible alarm
[855]
[2952]
Set the delay before a GSM No Service trouble is
reported. (000 - 255 x 2 sec. / default: 016 (32 sec.)
Command
Description
P[password].A[IP address].P[port
number]
Used for GPRS remote access
P[password].IP.[call back phone
number]
Used to obtain the IP address and IP
port of the PCS250G and whether or
not the “bandwidth saver” option is
being used
P[password].RESET
Used to reset the PCS250G
P[password].BWS.ON
Used to enable bandwidth saver
mode
P[password].BWS.OFF
Used to disable bandwidth saver
mode
P[password].STATUS.[phone
number]
*This command is not available
with use of the UC300.
Used to obtain the signal strength,
signal quality, GPRS connection sta-
tus, and APN settings of the current
SIM card
P[password].APN1.NAME.[Access
Point Name]
Used to program the SIM Card 1 APN
P[password].APN1.USER.[Access
Point Name]
Used to program the SIM card 1 APN
User Name
P[password].APN1.PSW.[Access
Point Name]
Used to program the SIM card 1 APN
Password
P[password].APN1.CLEAR]
Used to clear the SIM Card 1 APN
P[password].VAPN1.NAME.
[Access Point Name]
Used to view the SIM card 1 APN
P[password].APN2.NAME.[Access
Point Name]
Used to program the SIM card 2 APN
P[password].APN2.USER.[Access
Point Name]
Used to program the SIM card 2 APN
User Name
P[password].APN2.PSW.[Access
Point Name]
Used to program the SIM card 2 APN
Password
P[password].APN2.CLEAR
Used to clear the SIM card 2 APN
P[password].VAPN2.[CALL BACK
PHONE NUMBER]
Used to view the SIM card 2 APN
information
P[password].[IP1W1/ IP1W2/
IP2W1/ IP2W2/ IP3W1/ IP3W2/
IP4W1/ IP4W2].[domain name]
Set domain name for GPRS receiver
P[password].[IP1W1/ IP1W2/
IP2W1/ IP2W2/ IP3W1/ IP3W2/
IP4W1/ IP4W2].CLEAR
Clear domain name for GPRS receiver
P[password].DNS.[ip address]
Set domain name server (DNS) IP
address
P[password].DNS.CLEAR
Clear domain name server (DNS) IP
address
P[password].VIP.[phone number] Get domain name server (DNS) info
C[user code].[ARM/OFF].A[area
number], [area number], [area
number]TO[area number]
Arm/Disarm area
P[password].---S
Disable SWAN polling
(V4.10.011 and up)
P[password].+++S
Enable SWAN polling
(V4.10.011 and up)
Specifications
Description
RF Power
Class 4 (2W) @ 850/1900 MHz
Class 2 (1W) @ 1800/1900 MHz
Antenna Bandwidth
70 / 80 / 140 / 170 MHz
Antenna
Gain <3dBi; impedance 50 ohm
Input power >2W peak power
Voltage Input
12 VDC nominal
Consumption (1.2A peak)
during GPRS/GSM transmis-
sion
100mA standby
Average 450 mA
Operating Temperature
0ºC to 50ºC (32ºF to 122ºF)
Encryption
128-bit (MD5 and RC4) or 256-bit
(AES)
SMS Protocol
8-bit (IRA:ITU-T.50)
or 16-bit (UCS2 ISO/IEC10646)
Humidity
5 - 90% non-condensing
Weight
200 gr (7.05 oz)
Dimensions
17.2 x 9.8 x 4.4 cm
6.8 x 3.9 x 1.7 in.
Certifications
Please visit Paradox.com for the lat-
est certification information
Command
Description
Warranty
The Limited Warranty Statement can be found on the website
www.paradox.com/terms.
Patents
Your use of the Paradox product signifies your acceptance of these terms and
conditions. The following US patents may apply 5,886,632 and 6,215,399. Other
Canadian and international patents may apply.
©2018 Paradox Security Systems (Bahamas) Ltd. All rights reserved.
Specifications may change without prior notice.
