Paradox ParaVox, User Manual

Page: 17 / 24

ParaVox 15
corresponds to an empty voice or pager number is selected, an "error" message is
played and the user can enter another location. To disable a zone, enter zero in all
four number locations for that zone. Press the [*] star key after the last entry to enter
less than four entries and access the review menu.
4.6 T
EST
M
ESSAGE
S
ENDING
To test dialer functionality, enter the Test Message Sending menu and enter a digit
between one and eight corresponding to the desired telephone number location (see
section 4.1 on page 9). If an empty location is selected (no number is stored there),
the "error" prompt will be played. Another selection can then be entered.
After selecting the desired telephone number location, the ParaVox will dial the
selected telephone number and after the Post Dial Delay it will play the message
recorded in Message Location 1.
Telephone numbers 1 to 4 will always play the voice message
stored in Voice Message Location 1. Pager numbers 5 to 8 will
always play the pager message stored in Pager Message Location
5.
EXAMPLE:
To test the message transmission of telephone number 4. Press the [6] key from
the User’s Main Menu, then press the [4] key to select Telephone Number
Location 4. The ParaVox will dial the number stored in Telephone Number
Location 4. When the Post Dial Delay has elapsed, the ParaVox will transmit the
message programmed in Voice Message Location 1.