Paradox K656 Touch Sense, User Manual

Page: 35 / 56

Voice Dialer / SMS Page 35
Chapter 9: Voice Dialer / SMS
The VDMP3 Voice Dialer, is a voice-assisted module that
can be programmed to call up to 8 telephone numbers in
the event of an alarm. You can also call the VDMP3 from
an outside line, enabling you to arm or disarm the system
as well as activate up to 8 programmable outputs (PGMs).
Calling the VDMP3 (outside line)
Connected to an answering machine:
1) From an outside line, dial the telephone number to
which the VDMP3 is associated.
NOTE: If the telephone number that is associated with
the VDMP3 has an answering machine, hang up the
telephone when the line rings, and dial the telephone
number again within the time limit set by your installer.
2) When the VDMP3 answers the line, you are prompted
to enter your user code .
3) System status is given, as well as options to arm/
disarm (1) and control features (PGMs) (2).
NOTE: If you hang up while in communication with the
VDMP3, you must wait 2 minutes before connecting
again. To avoid having to wait, press “#” to disconnect
from the VDMP3 before hanging up.
Not connected to an answering machine:
1) From an outside line, dial the telephone number to
which the VDMP3 is connected.
2) When the VDMP3 answers the line, you are prompted
to enter your user code .
3) Options are given to arm/disarm (1) and control
features (PGMs) (2).
Receiving a Call From the VDMP3 (alarm
in system)
When the VDMP3 calls because of an alarm in the system,
the option is given to disarm the system or disconnect
(##). If you hang up without disarming or disconnecting,
the VDMP3 calls the next telephone number on its list
(see
Telephone Numbers in the VDMP3 Setup
Instructions).