[
STAY
]
Cancel communication attempts
(master code and user 1 can only stop calls to Espload),
(installer code - all communications)
Info Mode
If the
[
INFO
]
key is pressed, Emergency Calls will be dis-
played. Three emergency messages can be programmed
(addresses
150
to
155
). follow the Display Editing procedures
to edit these messages.
Each emergency message consists of 2 lines containing 16
characters. Addresses are paired as follows:
Message #1: Addresses
150
and
153
.
Message #2: Addresses
151
and
154
.
Message #3: Addresses
152
and
155
.
Enter the first line of the emergency message in the first address
and the second line of the message in the second address.
Power supply failure
The LCD display will alternate between:
TROUBLE POWER SUP
-
PLY
and system status messages.
Power supply level
In normal mode, press
[
TRBL
]
then
[2
ND
]
, multiply the decimal
value on the LCD display by 0.09 to get the exact power sup-
ply voltage level.
Viewing the event list (view event list mode)
In normal mode, pressing
[
MEM
]
, followed by
[
INFO
]
switches
IM639
21
4. Use
Espload
software to download information to keypad. To
upload keypad, press F4 and select full upload (in
Espload
software), enter into keypad programming and press
[
TRBL
].
Key access programming
Several control panel features can be quickly programmed on
the keypad, without entering any programming addresses or
section numbers. Select one-key access programming by
pressing
[
ENTER
]
, followed by the Installer code. Then press a
single key (from the following list) corresponding to the feature
you want to activate:
[
MEM
]
Panel time
and
clear "trouble 8"
(all 3 codes)
Enter two digits (00 to 23) for hours + 2 digits (00 to 59)
for minutes.
[
BYP
]
Test report
(all 3 codes)
Reporting is enabled at address
086
keys
[11]
,
[12]
. A
value must be entered at address
512
, and both tele-
phone and account numbers must be programmed.
[
TRBL
]
Call Espload via telephone
(all 3 codes)
Panel ID (addresses
004
-
005
) and PC password num-
bers (addresses
006
-
007
) and PC download phone
number (addresses
008
-
015
) must be programmed.
[
AWAY
]
Answer Espload
(all 3 codes)
This feature is available when using the ADP-1 adapter.
In Espload, "blind dial" must be activated in "modem
setup" section, and panel phone number programmed
(works also without ADP-1).
IM639
20
All manuals and user guides at all-guides.com
