Paradox Digiplex EVO DGP2-640 Reference & Installation Manual Download Page 21

DGP2-640 Icon LCD Keypad  

17

Warranty

Paradox Security Systems Ltd. (“Seller”) warrants its products to be free from defects in 
materials and workmanship under normal use for a period of one year. Except as specifically 
stated herein, all express or implied warranties whatsoever, statutory or otherwise, including 
without limitation, any implied warranty of merchantability and fitness for a particular 
purpose, are expressly excluded. Because Seller does not install or connect the products 
and because the products may be used in conjunction with products not manufactured by 
Seller, Seller cannot guarantee the performance of the security system and shall not be 
responsible for circumstances resulting from the product’s inability to operate. Seller 
obligation and liability under this warranty is expressly limited to repairing or replacing, at 
Seller's option, any product not meeting the specifications. Returns must include proof of 
purchase and be within the warranty period. In no event shall the Seller be liable to the 
buyer or any other person for any loss or damages whether direct or indirect or 
consequential or incidental, including without limitation, any damages for lost profits stolen 
goods, or claims by any other party, caused by defective goods or otherwise arising from the 
improper, incorrect or otherwise faulty installation or use of the merchandise sold. 

Notwithstanding the preceding paragraph, the Seller’s maximum liability will be strictly 
limited to the purchase price of the defective product. Your use of this product signifies your 
acceptance of this warranty.

*BEWARE: Dealers, installers and/or others selling the product are not authorized to modify 
this warranty or make additional warranties that are binding on the Seller. 

The user is cautioned that any changes or modifications not expressly approved by Paradox 
Security Systems could void the user’s authority to operate/use the equipment.

© 2004-2005 Paradox Security Systems Ltd. All rights reserved. Specifications may change 
without prior notice. One or more of the following US patents may apply: 6215399, 6111256, 
5751803, 5721542, 5287111, 5119069, 5077549, 5920259, 5886632. Canadian and 
international patents may also apply. Digiplex is a trademark or registered trademark of 
Paradox Security Systems Ltd. or its affiliates in Canada, the United States and/or other 
countries. 

DGP2640_EI00.fm  Page 17  Thursday, April 7, 2005  12:05 PM

Summary of Contents for Digiplex EVO DGP2-640

























Reviews: