Paradox Digiplex APR-ADM2, Reference & Installation Manual

Page: 2 / 2

PGM O
UTPUT
Section [004] [004] - option [3] [3]
If option [3] in section [004] is on, the APR-ADM2 PGM output is
enabled and can be used. If option [3] in section [004] is off, the
APR-ADM2 PGM output is disabled and cannot be used.
PGM T
IME
B
ASE
S
ELECTION
Section [004] [004] - option [4] [4]
This option determines whether the PGM Timer will be in seconds
or minutes. If option
[4] in section [004] is off, the PGM Timer will
be in seconds. If option [4] in section [004] is on, the PGM Timer
will be in minutes.
P
ARTITION
A
SSIGNMENT
Section [005] [005] - options [1] [1] to [4] [4]
In Touch will only access the partitions that have been assigned to
it and ignore the partitions that have not. Section [005] , options [1]
to [4] represent partitions 1 to 4 respectively. To assign a partition
to the APR-ADM2 module, enable the option that corresponds to
the desired partition.
Figure 2: Installing In Touch’s PGM
Figure 1: Installing the In Touch