Esprit 728 Ultra & 738 Ultra
37
Part 10: Other Options
10.1
Telephone Line Monitoring (TLM)
Feature Select Programming
D
Address 086; Keys
[2
ND
]
and
[1]
Default: TLM Disabled
When enabled, the system verifies the existence of a telephone line every 4 seconds. If the system detects a trouble, the LED will
flash ON for 1 second and OFF for 1 second. TLM will activate a trouble when less than 3 volts is detected in four consecutive tests.
Please note that when the dialer detects a telephone ring, the TLM test stops for 1 minute. There are three TLM options, which
are set as indicated in Table 15 below:
1.
OFF/ON:
Line test failure will generate a trouble indication; key
[0]
will illuminate on the keypad (LED keypad only).
2.
ON/OFF:
Line test failure will generate a trouble indication and an alarm if the system is armed.
3.
ON/ON:
Line test failure will generate a trouble indication and cause a silent zone or a silent panic alarm to switch to audible mode.
[
ENTER
]
+ Installer code +
[0] [8] [6]
+
[2
ND
]
and
[1]
ON/OFF +
[
ENTER
]
10.2
Dialing Options
Feature Select Programming
D
Address 086; Key
[7]
Default: Pulse Dialing
You can program the control panel to use the pulse dialing or tone/DTMF dialing format.
Key
[7]
OFF: Pulse Dialing
Key
[7]
ON: Tone/DTMF Dialing
[
ENTER
]
+ Installer code +
[0] [8] [6]
+
[7]
ON/OFF+
[
ENTER
]
10.3
Dialing Pulse Rates
Feature Select Programming
D
Address 086; Key
[0]
Default: Pulse Europe 1:2
This selection determines the ratio between "pulse" time and "quiet" time. Select Pulse Europe for a 1:2 ratio and select Pulse
USA for 1:1.5. Must be set to pulse dialing mode, refer to
Key
[0]
OFF: Pulse Europe 1:2
Key
[0]
ON: Pulse USA 1:1.5
[
ENTER
]
+ Installer code +
[0] [8] [6]
+
[0]
ON/OFF +
[
ENTER
]
10.4
Keypad Panic Options
Feature Select Programming
D
Address 088; Keys
[1]
to
[6]
Default: Disabled
This feature will generate an alarm when the user presses two specific keys on the keypad simultaneously for 2 seconds as
follows:
Key
[1]
ON = Panic 1 (keys
[1]
and
[3]
) enabled
Key
[2]
ON = Panic 2 (keys
[4]
and
[6]
) enabled
Key
[3]
ON = Panic 3 (keys
[7]
and
[9]
) enabled
Keypad panic options:
Key
[4]
OFF = Panic 1 silent
Key
[4]
ON = Panic 1 audible
Key
[5]
OFF = Panic 2 silent
Key
[5]
ON = Panic 2 audible
Key
[6]
OFF = Panic 3 silent
Key
[6]
ON = Panic 3 fire alarm
[
ENTER
]
+ Installer code +
[0] [8] [8]
+
[1]
to
[6]
ON/OFF +
[
ENTER
]
Table 15: Telephone Line Monitoring (TLM)
Key
[2
ND
]
[1]
OFF
OFF
- TLM is disabled (default)
OFF
ON
- TLM generates a trouble only
ON
OFF
- generates an alarm if armed
ON
ON
- silent alarm becomes audible
(address 086, key
[9]
has to be OFF)
Summary of Contents for 738ULT
Page 1: ...Versions 4 4 728ULT 4 1 738ULT Reference Installation Manual 728ULT 738ULT...
Page 2: ......
Page 54: ...Notes...
Page 55: ......
