background image

40  

  Limited Manufacturer’s Warranty 

GSL-SB2B Double Side Burner Operator Manual 

Limited Manufacturer’s Warranty  

Limited Warranty  

Paradise Grills International, Inc. (PGI) warrants the GSL-SB2 Double Burner from the later of the date of 

purchase or delivery as follows:  

(i)

 

limited lifetime warranty on structural integrity of stainless steel housing to be free from original 

manufacturing defects;  

(ii)

 

five (5) years on burners (limited to no burn through); and  

(iii)

 

one (1) year on all other parts (collectively, the “Limited Warranty”)  

 

This Limited Warranty is:  

(i)

 

limited to the ORIGINAL PURCHASER at original site of delivery;  

(ii)

 

limited to original manufacturing defects only; and  

(iii)

 

limited to the shipment of replacement parts when covered by warranty  

THIS LIMITED WARRANTY EXCLUDES ON-SITE SERVICE CALLS, LABOR, AND LABOR-RELATED COSTS.

 

This Limited Warranty is void upon the ORIGINAL PURCHASER’S transfer of ownership of the burner unit to 

any other person or entity. 
This Limited Warranty excludes and does not cover:  

(1) oxidation, rust, corrosion, discoloration, staining, or other cosmetic issues; or  
(2) damage, deterioration, or warping related to or resulting from, in whole or in part:  

(a) failure to install and use a proper regulator for gas supply type (NG or LP);  
(b) severe weather conditions such as hail, earthquake, hurricane, snow, windstorm, 

tornado, microburst, or heavy rainfall;  
(c) corrosive conditions such as chlorine in the air, high salt content air, fertilizers, 

pesticides, corrosive cleaning solutions, or masonry dust and debris; or  
(d) improper installation or operation, neglect, failure to maintain, misuse, commercial use, 

abuse, alteration, infestation, vandalism, accident, extreme environments, grease fires, or 

exposure to high cooking temperatures. 

The ORIGINAL PURCHASER is responsible for the safe and proper installation, usage, maintenance, servicing 

and cleaning of the burner unit in accordance with all instructions in this Operator Manual.  

Summary of Contents for GSL-SB2B













































Reviews: