CUSTOMER SERVICE
1-888-867-6095 • [email protected] • www.paradisegardenlighting.com
5001-GL28637-BIL_050416
READ, FOLLOW AND SAVE THESE INSTRUCTIONS
Solar Powered
Deck & Stair Marker
MODEL #GL28637SS
DEAR CUSTOMER,
Congratulations on your purchase of a PARADISE
®
lighting product. Our products will help to enhance the beauty of your home and provide many
years of enjoyment. PARADISE
®
offers a wide selection of lighting products of the highest professional quality. Ask your dealer about the many
other PARADISE
®
products that will help to create your own paradise.
To ensure the maximum performance of your garden light, please read and save these instructions.
Replacement parts may be ordered by using the fixture model number and the part’s name.
1.
How your solar powered fixture works
During the day, the solar panel converts sunlight into electricity and recharges the battery(s). At night, the lights turn on automatically using the
electricity stored during that day. The number of hours the light stays on depends on your geographical location, weather conditions and seasonal
sunlight availability. Place the solar panel in an area where it can receive direct sunlight for at least 8 hours each day. Shadowed locations will not
allow the batteries to charge fully and will reduce the hours of nighttime lighting. The selected location should not be near nighttime light sources,
such as porch lights, streetlights or pool lights, as these may cause the solar light to turn off prematurely.
2.
First time use
Turn the unit over and move the ON/OFF switch to the “ON” position. Place the solar light in a location where it can receive a full 8 hours of
sunlight to allow the rechargeable battery to reach maximum capacity.
• Using the supplied plastic bracket, select the desired
installation location.
Drill a hole to insert the supplied plastic anchor and
attach the bracket using the screw supplied. (Depending
on the installation material, other fasteners may be
required.
• Align the holes underneath the light with the tabs on
the bracket.
Insert the tabs into the holes to secure the light.
Screw
Bracket
Holes
Plastic
anchor
3.
Fixture Installation
ON
OFF
ON
O
FF
