Paradigm SUB 1, Owner'S Manual

Page: 24 / 42

Getting Started
Begin with the suggested locations for subwoofer placement given at the
beginning of this manual then connect your subwoofer following the instructions
given in the section entitled "Subwoofer Connection". Once your subwoofer
is connected, read the instructions below, then follow the prodedure at right
to install
Paradigm's Perfect Bass Kit .
Before starting the procedure, note the following:
• PC requirements are Windows XP, Vista or Windows 7* and 2 USB ports.
If you are running a newer operating system see note about updating
PBK files to match on page 17.
• If you are using a laptop computer, check power settings and battery
meter before starting to ensure the procedure will not be interrupted.
Although systems vary, in general, if your home theater receiver/processor also
has a Room Correction system, PBK should be set up and running before
setting up your system’s ‘EQ’, especially if more than one subwoofer will
be in use.
IMPORTANT! Don’t stand too close to the microphone or make noise
when sweep tones are playing (it would be best to keep younger or
talkative family members and even pets out of hearing range). The
program rejects continuous background noise (i.e. fans) but will give
an error message requiring re-measurement upon sudden noise.
THE PROCEDURE
IMPORTANT! Each time we introduce a new product to work with
PBK, the PBK software must be updated. The unique calibration file
required to operate your microphone is included on the enclosed
CD and will be installed during program installation from the CD.
However, there may have been additional software program
updates since your CD was published. To achieve optimal
performance you must be using the latest software version. Follow
the instructions provided below to install the software and then
check our website for newer versions.
Install the Software
Insert the PBK installation CD into your computer’s CD or DVD drive.
Installation instructions will appear on your screen. If your computer does not
allow a CD to ‘auto-run’, double-click on the ‘My Computer’ icon on your
computer desktop and select the CD drive, open it and double-click on
setup.exe . The process will install several files into a Paradigm folder on your
computer and create shortcuts on your Start Menu.
Confirm Your Software Version Once the Software is Installed
a) End the program and reopen it using the shortcut in the Start Menu;
b) A ‘Welcome’ window will appear on your screen. Click ‘Open a
previous session’ and then click ‘OK’;
19