background image

INTRODUCTION

Thank you for choosing speakers from Paradigm’s Reference Collection and congratulations! You 
are about to hear the difference these state-of-the-art high-end speakers will make in your music 
and home theater system.

Your speakers were designed and engineered in our Toronto, Canada facility. They are  internationally 
recognized for their exceptional state-of-the-art sound. In fact, 

Paradigm is the only speaker brand in 

the world to be rated #1* year after year.

 

Extensive listener preference tests conducted by the National Research Council (NRC) give our 
design engineers a firm understanding of how we hear speakers and clearly establish which design 
parameters are most critical to good sound. Using the NRC findings along with measurement-based 
analysis done in the anechoic chamber at our Toronto facility and listening tests carried out in 
our controlled double-blind listening rooms, Paradigm engineers work to constantly improve our 
speakers in three critical areas:

Flat Midrange:

 Smooth and even with coloration reduced to the lowest level possible. 

Smooth Total Energy Response:

 On and off axis, sound must be fundamentally similar. Dispersion 

must be wide and uniform ensuring superior imaging and a wide listening area. 

 

Low Distortion:

 Lowest levels possible.

In addition, Paradigm concentrates on two other significant performance areas: 

Better Bass Response:

 Tight, extended and well defined.

Higher Power Handling:

 to improve dynamic contrasts and sonic realism, power compression 

must be minimized.

 Unyielding attention to all of these areas results in state-of-the-art speakers that are measurably 
and audibly superior. Comprehensive R&D, leading-edge design, use of the finest materials and 
sophisticated manufacturing and quality control provide vastly superior performance for each 
component part at every stage of design. Quite simply, 

we build better sound

 and we have the 

product awards to prove it.

Your new speakers will provide you with stunning reference quality sound and unparalleled listening 
pleasure for many years. Their ultra-thin profile was designed to complement the thinnest flat-panel 
television on the market today as well as the ‘even thinner’ flat panels yet to come. 

To achieve all of the exceptional sound they are capable of providing requires care in installation 
and operation. Please take the time to read this manual and follow all instructions. If you have 
further questions, contact your Authorized Paradigm Reference Dealer or visit the Q&A page in the 
Tech Support section of our website at 

paradigm.com

.

* Rated #1 Best Price/Value.

 Inside Track

 Annual Dealer Survey. An annual independent nationwide survey of consumer electronics specialist retailers and 

custom installers.

1

TABLE OF CONTENTS

Introduction  . . . . . . . . . . . . . . . . . . . . . . 1
The Technology 

Behind Your New Speakers  . . . . . . . . . . . 2
Your New Speakers. . . . . . . . . . . . . . . . . 3
How To Avoid Speaker Damage . . . . . . . . 3
Your Listening Room . . . . . . . . . . . . . . . . 4

Placement  . . . . . . . . . . . . . . . . . . . . . . . 5
Wall-Mounting  . . . . . . . . . . . . . . . . . . . . 7
Connection. . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting  . . . . . . . . . . . . . . . . . . . 9
Technical Specifications  . . . . . . . . . . . . 10
Limited Warranty  . . . . . . . . . . . . . . . . . 12

Paradigm DOES NOT supply hardware for mounting speakers to the 

wall. Hardware shown in this manual is for example only and will vary 

depending on the wall type. Always use screws appropriate for wall 

type and weight of speakers.

If installing into drywall, install into 1/2˝ (13 mm) or 5/8˝ (16 mm) drywall 
only. Screws must be long enough to go through anchor bolts 

(not supplied)

 

and firmly into drywall 

(see inset circle, page 8).

IMPORTANT: ASSEMBLY INSTRUCTIONS FOR SPEAKER STANDS 

(INCLUDED WITH SPEAKERS) ARE FOUND IN THE BOX WITH 

THE STAND.
IMPORTANT: READ BEFORE WALL-MOUNTING YOUR SPEAKERS.

Wall mount your speakers securely enough that they cannot fall and 

cause personal injury or damage to property. Use safety straps where 

supplied. Detailed information on attaching the safety straps is included 

in the section on Installation later in the manual.

NON LIABILITY: We are aware that the mounting assemblies provided for speakers 

in this manual could be used for purposes and in ways other than those for which 

they were intended. The manufacturer, distributor, retailer and their respective 

agents cannot be held responsible or liable for injuries or property damage—direct, 

indirect or consequential—arising from the use of or inability to use these products 

safely and properly. Every effort has been made to provide accurate, error-free 

installation instructions. Paradigm Electronics Inc. disclaims liability for difficulties that 

may arise from the misinterpretation of information contained in these instructions.

RECYCLING AND REUSE GUIDELINES (Europe)

In accordance with the European Union WEEE (Waste Electrical and Electronic Equipment) directive effective August 13, 
2005, we would like to notify you that our speakers may contain regulated materials which, upon disposal, require special 
reuse and recycling processing. For this reason Paradigm Electronics Inc. (the manufacturer of Paradigm speakers and 
Anthem electronics products) has arranged with its distributors in European Union member nations to collect and recycle this 
product at no cost to you. To find your local distributor please contact the dealer from whom you purchased this product or 
go to our website at 

www.paradigm.com

.

Please note that only the product falls under the WEEE directive. When disposing of packaging and other shipping material 
we encourage you to recycle through the normal channels.

© PARADIGM ELECTRONICS INC. 

 

043014

Summary of Contents for MILLENIA LP 2

















Reviews: