25
1. Turn the
Level
control completely counter clockwise to its minimum.
2. Turn the
Low Pass Filter
control to Bypass.
3. Turn the
Phase
control to
0°
(completely counter clockwise).
4. Listen to a bass music or video selection while seated in your primary
listening area and turn up the
Level
control until the subwoofer can
be clearly heard.
5. Rotate the
Phase
control until you hear the most bass. Your
subwoofer and front speakers are now in phase. Do not change
phase alignment again unless you move the subwoofer or front
speakers to a different location in your room, or move or remove any
large items of furniture or room furnishings (i.e. carpet, draperies, etc.)
6. Turn the
Level
control completely counter clockwise to its minimum.
7. Slowly rotate the
Level
control until you match the subwoofer’s
volume with the Volume of your front speakers. Bass should be
clearly audible, but not intrusive.
NOTE:
If you happen to have an SPL meter, set the meter to 80, SLOW
and C weighted. Then enable the subwoofer test tones on your receiver/
preamplifier. With this set repeat
Step 7
until the meter reads
75dB
.
SETTING SUBWOOFER CONTROLS
Using The App — With LFE Connection
