5. Secure Décor Speaker rails and TV mounts, as shown on previous pages, using washers
and screws. DO NOT TIGHTEN SCREWS AT THIS STAGE.
6. Attach speaker brackets (Z) to speaker using washers (A) and screws (I).
7. Ensure speakers are properly aligned with TV before tightening all screws
and threaded rods with nuts (F) or (G) if applicable, only when using threaded
rods (U) or (V). Now, tighten screws securely.
At this stage, mounting system is now ready to be installed on wall.
Follow instructions which came with your TV mount to place TV on wall.
CAUTION: CAREFULLY LIFT BY RAILS. DO NOT LIFT BY TV EDGE.
Support entire bracket assembly and place onto TV Mount on wall
(purchased separately). Follow TV Mounting instructions. WHEN RE-
HANGING TV, SUPPORT BOTH THE TV AND THE ATTACHED SPEAKERS.
Fine Adjustments:
After hanging TV, according to manufactures bracket instructions, adjust speaker to be
flush with TV. Use Allen Key to secure tightly.
A
I
Z
Channel in speaker
back used to drive
bracket screws
