ASSEMBLY
OPERATION
Bag Support Bracket
Figure 2.
Figure 4.
Figure 3.
Figure 1.
Lock
ing Sleeve
Your TS-1 is shipped to you fully assembled. Carefully
remove the TS-1 from it's shipping carton. Keep carton in
a safe, dry, place.
1. Before playing golf, ensure the battery is fully
charged.
2. Unfold the handle into the operating position until
the locking sleeve on the lower portion can be slid into
the locked position. (see figure 1.)
3. With the upper portion of the handle fully extended,
fold down the bag support bracket to lock the upper
handle in position (see figure 2.)
4. To fold down the Kaddy for storage or transporting,
reverse the prcedure 2 & 3. (see figure 3.)
Fully charge the battery before playing golf.
Install the battery into the Kaddy. (The battery can
lie down to reduce the height.)
Ensure the power switch is in the "off" position. (to
the right)
Connect the battery connector to the receptacle on
the Kaddy. The plug is designed to fit only one way,
do not attempt to force in the incorrect way.
Grasp the Kaddy handle, switch the power switch to
the "on" position. (to the left). Rotate the speed
control clockwise until the Kaddy begins to move.
(see figure 4.)
Continue to rotate the speed control until the desired
speed is attained.
To stop the Kaddy, rotate speed control in a counter
clockwise direction, or switch the power switch to
the "off" position. (to the right.)
After each round, disconnect the battery from the
Kaddy and return the battery to the charger. Ensure
the charger is switched on and leave the battery
charging until the next time it is required.
Note: See further information on battery charging
and care on the following pages.
1.
2.
3.
4.
5.
6.
7.
8.
Figure
Power Switch
Speed Control
