ParaBody GS6-LP5A-101 User Manual Download Page 2

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT.  TO MINIMIZE RISK FOLLOW THESE RULES

!

1. Before using, read all the warnings and instructions
on the use of this machine.  Use only for intended
exercise.  

DO NOT

 modify the machine.

2. Obtain a medical exam before beginning any
exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use.  

DO NOT

 use it if it

appears damaged.  

DO NOT

 attempt to fix a broken or

jammed machine.  Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.

5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer.  If
unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated
position.  

DO NOT

 use the machine if found in this

condition.  

DO NOT

 attempt to fix.  Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using
machine.  Pay particular attention to the cable ends.

DO NOT

 attempt to fix.  Notify your authorized

ParaBody dealer before use and have repairs made by
an authorized service technician.

8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.

9. Children must not be allowed near this machine.
Supervise teenagers.

.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety  Statement.............2
General Notes..................3
Tools Required................3

NOTE:

  In a continual effort to improve our products, specifications are subject to change

                   2002 Life Fitness, a division of Brunswick Corporation.  All rights reserved.
              ParaBody is a trademark of Brunswick Corporation

             www.parabody.com

2

Parts list..........................4
Assembly Instructions.....4-12
Insert-Registration Card

©

Summary of Contents for GS6-LP5A-101













Reviews: