ParaBaseTec ParaGolfer, User Manual

Page: 85 / 124

Page 82
Operation
ParaGolfer Page 83
Operation
ParaGolfer
r
The batteries can never be fully discharged (exhaustive discharge).
r
In order to feed the charging current fully into the battery, the operator panel of the
ParaGolfer must be switched off throughout the charging process.
The following points must be adhered to when recharging the batteries:
r
Only the battery charger specified by Parabasetec, Inc. must be used. In case of non-
compliance no warranty claims will be accepted.
r
The voltage setting on the battery charger must conform with the country specific voltage
of the corresponding mains supply.
The following precautions must be taken before working with the battery charger:
r
The battery charger must only be used within the specified temperature limits (see
chapt. 3).
r
The battery charger must be protected against direct insolation, to avoid additional
heating of the unit.
r
The installation location must be dry and well ventilated. Any entering of dust and dirt
must be prevented. This may adversely affect the function of the battery charger.
r
The battery charger should be cleaned with a dry cloth.