NB. Tiles can be
core drilled (16mm)
for a cleaner and
neater finish.
7. Screw mixing nozzle onto adhesive cartridge
(supplied) and dispense 2-3 trigger pulls of adhesive
to waste until colour is grey with no streaks.
8. Insert tip of nozzle
to bottom of hole and dispense
adhesive.
9. Fill hole
to about 2/3 full.
10. Insert threaded stud socket,
with M12 threaded socket
on top, with a rotating motion to release trapped air.
Finish the top of the M12 threaded socket flush with
finished floor, making sure that there is no adhesive in
the threaded socket.
11. Wait 15-30 minutes until adhesive has fully cured
before loading.
12. Clean up
with acetone.
13. Attach Kingfisher
14. Test Kingfisher
after 30 minutes.
CAN WE HELP?
Call us on
1300 444 600
if
you have any questions or
need added guidance on
installation.