PARA Dox CR-R880-BL, Installation Manual

Page: 7 / 20

CR-R880-BL 5
Audible Tone
The CR-R880-BL reader includes a built in beeper that
will emit a tone every time the brown wire is pulled low.
Weather Resistant
Mount indoors or outdoors.
SwiftRead
After presenting the card, regardless of the card's access
status, the LED will flash to indicate that the reader has
read the card and the data was sent to the controller.
After the SwiftRead period, the controller resumes
control of the LED as usual.
Diagnostic Test
All CR-R880-BL readers perform a self-diagnostic test to
ensure proper operation at start-up and verify the
integrity of the data lines. Every time power is applied to
the reader, the green LED will flash twice to indicate the
diagnostic test was performed and no problems were
found. If the reader determines a problem after
performing the diagnostic test, the green and red LEDs
will toggle on and off and the beeper will emit a pulsing
tone.
Installation
Important Notes on Selecting an Installation Site
Please consider the following when installing the CR-
R880-BL card reader:
1. Avoid wiring the CR-R880-BL cables in the same
conduit with AC power cables, lock power, or signal
wiring.